This project was inspired by another bloggers post, which I can’t find again on Pinterest, so will have to edit it back in later when I can find it. Anyway, I ended up doing something completely different to hers, because I couldn’t get my hands on the right kind of cups. The original mobile was created with plastic (recycling number 6) disposable drinking cups. I hunted high and low however, the only ones of them here were solid colours, so I had to settle for these shot glasses. The shot glasses are a lot thicker though, so the entire method required adjusting. As you can see in the gallery images, melting these at a low heat basically make little plastic globs that would only be good for playing jacks with. Eventually I worked out that by turning the heat up enough, I could get them to melt flat. However, they did emit a nasty smell at this temp, so I took the project out to the BBQ.
Adding the next colour
After melting the first cups, I added another cup, so there was enough plastic to cover the base of each muffin hole. I was not too worried about thickness, some ended up with 3 cups, I broke a few cups up to splash some other colour around. The BBQ was set to 220C with the lid down. After cooling, this is what you get;
The finished disks
They actually set really hard and when clicked together sound like glass rather than plastic. Makes them perfect for a wind chime. Just like with my previous sun catcher, I drilled holes in the sides of each piece using a normal drill bit. None of them broke this time, which was an extra win. Then we threaded some fishing line through, held each end together and threaded random shiny and transparent beads along the 2 lines. Admittedly I do have a ridiculously huge stash of beads and stones accumulated from over the years, but you can pick up cheap beads at $2 shops that will still make the project inexpensive if you were starting from scratch. The first line was 11cm, then I continued along making each one 1cm longer, there is 17 in total. My darling partner tied them on to the pre made metal loop (from spotlight – and much to his disappointment, he is not a crafty person). Once they were all tied on, I just slid them around until they were spaced evenly. And done!
Close up
** Please note, breathing in the fumes from melting plastic is probably not a very good idea. So if you do try this at home, try to use the BBQ or make sure the room is well ventilated, and preferably don’t be near the oven while its all happening. It not like burning tyres or anything, but it sure doesn’t smell like something you should be breathing in!
stay.at.home.life 