Check out these cute bugs the girls at All Tizzied Up put together on the weekend. Made from pipe cleaners, pom poms, wooden pegs, goggly eyes and tulle. So simple and so cute!
They have kindly taken step by step photos so you can be inspired too, to create your own colouring creepy crawlies.
I actually stole this idea from Mr3s current favourite show, Mister Maker. We used soup mix, but you could use lots of different things, dry lentils, rice, couscous, anything that is going to give you a unique texture and that is fun to run through your hands.
I just printed out some basic shapes from the internet. Keep them simple as you’re going to cover up any detail anyway. Smear the area with some craft glue and attach an goggly eye. Then let the kids sprinkle the mix over the rest of the glue area to completely cover it. Gently shake off any excess into the bin. These took about 24 hours to dry. Once fully dry, cut out. We created a simple background with some coloured paper and put them in $2 Ikea frames.
Everyone loves a sun catcher – well according to Pinterest they do! This is basically the same concept as the Valentine Hearts we did a few weeks back, but instead of random shapes, we used a punch to make stars and circles etc from the cellophane. Once laminated, we cut out smaller shapes and hung them from a branch with some beads.
Ms 5 cutting out the shapes with a punch
Sprinkle over the laminating sheet,
All spread out
Ready to go through machine.
Trace out some shapes with a marker then cut out.
Hang on fishing line or string of your choice
we added some beads for extra colour
Sun catcher kids craft.
This is yet another almost impossible thing to photograph, it looks so much more bright and colourful in real life. I don’t know why I keep doing this to myself, or maybe I just need to do a photography coarse, or even read the instructions for my DSLR…
We have done a bubble painting project before for Easter, it is so easy and the results are always cool, so we have tried it again this time just using pink. We also used some pink paper as well as the white, where as last time we just used white paper.
Valentine Door Hanging,
Again I cheated and printed out some heart shapes, rather than drawing them all just so all the sizes were consistent. You could obviously trace around a cookie cutter too, but hey, did I mention I am lazy? I didn’t really measure out the ingredients for the bubble paint, it really was a squeeze of dishwashing liquid, splash of food colouring and a splash of tap water. Then let the kids blow bubbles in the mixture until the bubbles come up over the top of the bowl. Get them to quickly place the paper gently over the bubbles and the patterns will transfer to the paper. Instead of cutting each shape out first this time, we did the painting then cut them out after they were dry. Then it was just a case of attaching them to some gift ribbon with tape. I stuck them to the wall with blue tac.
Ms5 and Mr9 blowing bubbles in the solution
Bubble patterns, left to dry.
Cut out and attach to some string with tape.
Hearts on a string.
If you wanted to make these hang in a door way, it would be a good idea to paint both sides of the paper, so they can spin and still look pretty on both sides.
I was determine to do some Valentine craft today with the kids before we ran out of time. I had an idea in my head of what I wanted to do, but we couldn’t find the type of paper I needed. While picking up some other bits and pieces from the grocery store, we found A4 laminate sheets on special and decided to grab some for the craft cupboard. I had a look around Pinterest for inspiration and then it finally came to me, lucky we grabbed those sheets!
The steps are pretty self explanatory I think, but you can see more instructions by clicking on or running your mouse over each photo below.
Ms 5 cutting the cellophane up into squares.
I drew a large heart on the back of some silver card then cut it out with scissors.
I then cut the centre out with a Box cutter.
Ms5 placed the pieces into the laminate sheet, using the middle of the heart under to give her a rough guide of the area she needs to cover.
Mr3 having a go, not quite understanding ‘don’t crumple them up!’.
Ms5 puts the close sheet into the laminator.
Mr9 prepared the heart boarder with double sided tape.
Double sided tape on the frame.
Mr9 cuts away the excess ‘glass’ from the frame after sticking it down.
Stained glass heart window.
The similar projects I have seen on Pinterest use clear book contact, which you could also use if you don’t have a laminating machine. The laminate sleeves give a much clearer finish though. I was worried at first that the cellophane might melt as it went through the heat, but it was fine.
All Tizzied Up has taught her daughters how to make these ribbon flowers just as she did when she was a kid. Very cute and pretty easy once you get the hang of it.
All you need is some ribbon (thickness will determine how big the flower head ends up being), some felt if you would like to add leaves, styrofoam ball, wooden skewer and some pipe cleaners for the stem. Step by step photos and instructions can be found by running over or clicking on the picture gallery below.
Start by folding your length of ribbon at a right angle. These ones are made with lengths of ribbon around 50cm.
Continue to fold the ribbon over itself one side at a time
You should end up with something like this!
Grab the ends and pull one side only.
Until you end up with something like this!
Secure the rosette with some hot glue or a loose stitch.
Cut ball in half,
glue to felt, to create the back of the flower.
Cut out some leaves,
glue to underside of flower. Insert skewer.
Wrap skewer with pipe cleaner for colour and texture, or you could just use a green skewer.