It has been entirely too long between entries. Life gets like that though I guess. I actually made this wind chime back in May, but have not had a chance to blog about it. Pretty sad when you can’t find a spare half hour in 7 months… but hopefully I will make up for that over the next 3 weeks while my schedule is not so hectic.
I am really happy with the way this project turned out, but it may not be something everyone can make at home, as you will need access to a kiln for the baking of the clay. I am lucky enough to have that access 🙂 The discs were made from potters clay, available from any good craft shop, about $30 for 10kg (it’s really heavy when wet!). I rolled some clay out to around 5mm thick, then cut the circles out using a metal egg ring. I then used a variety of leaves and flowers from around the garden, laid them over the clay and rolled over gently with a rolling pin, just enough to create the patterns as you can see.
Clay circles with leaf and flower prints.
Once baked and cooled, it was time for assembly. Mr 5 and Miss 6 were happy to help decorate the pieces of fishing line with some chunky transparent glass beads I had in my bead stash.
Threading the beads on fishing line before assembly
We then went on a hunt for the perfect stick, attached it to a chair and began assembly. I wanted the discs to taper down, so this was not something the kids could help with.
Once I was happy with the positioning of each string, I tied them in a few more knots and decorated the top hanging twine. Cut off any loose ends and it’s done. As simple as that.
Each disc touches the next ever so slightly, making a lovely sound in the breeze, without being too noisy.
Beads in the sun – sun catcher wind chime
Clay and glass bead sun catcher
Everyone loves a sun catcher – well according to Pinterest they do! This is basically the same concept as the Valentine Hearts we did a few weeks back, but instead of random shapes, we used a punch to make stars and circles etc from the cellophane. Once laminated, we cut out smaller shapes and hung them from a branch with some beads.
Ms 5 cutting out the shapes with a punch
Sprinkle over the laminating sheet,
All spread out
Ready to go through machine.
Trace out some shapes with a marker then cut out.
Hang on fishing line or string of your choice
we added some beads for extra colour
Sun catcher kids craft.
This is yet another almost impossible thing to photograph, it looks so much more bright and colourful in real life. I don’t know why I keep doing this to myself, or maybe I just need to do a photography coarse, or even read the instructions for my DSLR…
We have done a bubble painting project before for Easter, it is so easy and the results are always cool, so we have tried it again this time just using pink. We also used some pink paper as well as the white, where as last time we just used white paper.
Valentine Door Hanging,
Again I cheated and printed out some heart shapes, rather than drawing them all just so all the sizes were consistent. You could obviously trace around a cookie cutter too, but hey, did I mention I am lazy? I didn’t really measure out the ingredients for the bubble paint, it really was a squeeze of dishwashing liquid, splash of food colouring and a splash of tap water. Then let the kids blow bubbles in the mixture until the bubbles come up over the top of the bowl. Get them to quickly place the paper gently over the bubbles and the patterns will transfer to the paper. Instead of cutting each shape out first this time, we did the painting then cut them out after they were dry. Then it was just a case of attaching them to some gift ribbon with tape. I stuck them to the wall with blue tac.
Ms5 and Mr9 blowing bubbles in the solution
Bubble patterns, left to dry.
Cut out and attach to some string with tape.
Hearts on a string.
If you wanted to make these hang in a door way, it would be a good idea to paint both sides of the paper, so they can spin and still look pretty on both sides.
All Tizzied Up has taught her daughters how to make these ribbon flowers just as she did when she was a kid. Very cute and pretty easy once you get the hang of it.
All you need is some ribbon (thickness will determine how big the flower head ends up being), some felt if you would like to add leaves, styrofoam ball, wooden skewer and some pipe cleaners for the stem. Step by step photos and instructions can be found by running over or clicking on the picture gallery below.
Start by folding your length of ribbon at a right angle. These ones are made with lengths of ribbon around 50cm.
Continue to fold the ribbon over itself one side at a time
You should end up with something like this!
Grab the ends and pull one side only.
Until you end up with something like this!
Secure the rosette with some hot glue or a loose stitch.
Cut ball in half,
glue to felt, to create the back of the flower.
Cut out some leaves,
glue to underside of flower. Insert skewer.
Wrap skewer with pipe cleaner for colour and texture, or you could just use a green skewer.
We made 2 different variations of valentine door hangers, but both styles use the same materials. The hearts are made from salt dough, the same as those DIY Christmas ornaments you see all over Pinterest. There is plenty of recipes and methods available online. The bows are a basic bow that again you’d see on Pinterest. There is hundreds of bow tutorials all over the internet too, but I kind of made it up as I was going along.
We used the following recipe
- 1 1/2 cups plain flour
- 1/2 cup fine table salt
- 1 tablespoon vegetable oil
- 2/3 cup chilled water
Mix all ingredients as you would biscuits, using some extra flour as necessary along the way to stop it sticking. Roll out 7mm thick, cut into shapes then bake at 120C for 2.5 to 3 hrs. Once cooled, we painted them with craft acrylic paint.
The top bow feature for this one was made by cutting 4 equal lengths of ribbon, putting a small line of hot glue in the centre of one at a time, folding each end into the middle to create a single bow shape. Then doing the same with the next ribbon, pilling them up as I went. You can see this in the photos. Finished off with a button.
Then it was just a case of threading the hearts, adding some extra ribbons and glueing all together at the back.
Mr 8 in the kitchen making salt dough (he did this all by himself, it is very easy)
kneading the dough.
roll out to 7mm thickness and cut shapes.
Bake for 2 – 3 hours at 120C
Ms5 painting the hearts
Create a loop that will sit flat against the door.
Small line of glue in the middle,
fold in each end onto the glue strip.
Finish off with a button
How cute are these? And so simple to make if you can get your hands on a few cheap materials. All Tizzied Up and her girls put these together as little Christmas gift bags.
All you need is some tulle in your choice of colours, a cheap elastic headband and some small calico or reusable bags (available at most $2 shops) and some ribbon or other embellishments if you choose. Oh, and a hot glue gun, of course!
Cut the tulle into lengths long enough to reach the bottom of your bags when folded over. For these bags, that was 30cm. You can buy tulle in 15cm wide rolls, this makes the job a lot easier than cutting the strips from a large piece, it is quite fiddly to work with. Fold the now cut strip of tulle in half and push the folded part through the bottom row of the head band so it is poking through a little, then thread the 2 loose ends through the loop you have just created and pull tight. Repeat this process right around the head band. Stretch over the bag and hold in place with a few spots of hot glue.
For the embellishment on the above bag, several ribbons were secured with hot glue, then piled together and stuck down, finishing off with a fabric embellishment. You could use anything though, buttons, curly ribbons, or just leave it as a plain skirt. Here is another example that All Tizzied Up made for my DD as she is a huge Peppa fan.
More detailed instructions available by running over the photos below.
What you need
Cut into 30cm lengths or as long as you need to cover your bag when folded over
Fold in half,
push the folded end through to create a loop,
Pull loose ends through the loop to secure
Repeat until you have a mini Tutu
Gather then strip and cut off any uneven ends
Flue to your bag (card is to stop glue sticking back together
Glue ribbon loops
Glue on top of each other.
Add embellishment if desired.
Tutu Bag Complete.